…
After all, ordinary people don't have Wu Hao's ability to control things with his mind and spirit. Only people like Wu Hao who can make all processes perfect without any errors can have such confidence and start running directly after everything is installed.
Soon, as Wu Hao input all the electricity into the fusion reaction device, super high temperature and pressure were generated in the fusion reactor, causing the nuclear materials inside to start a fusion reaction.
And the entire reactor started to glow and heat like a small sun inside.
The huge heat immediately starts to act on the steam generator to produce a strong air flow, which is transported to the inside of the steam turbine through special pipes. The continuous high-speed rotation of the steam turbine drives the generator set to start to generate huge electric energy, and this cycle continues. .
After passing through the transformer equipment, part of this electric energy was input into a large battery that Wu Hao had manufactured in advance, and the other part was directly connected to all the electrical equipment in the entire base.
For a time, all the spaces in the entire base became extremely bright, because in the more than half a month since Wu Hao started manufacturing, the entire base had not seen much light.
It has always been a few small LEDs that have taken on all the lighting work of the entire base. Naturally, there is no comparison with what they are now.
"Yes! Yes, everything is as I expected, and there is not much difference." Wu Hao saw that the entire fusion reactor and the corresponding power generation device were running well, and he was naturally very satisfied with this.
After all, this is the result of a month of hard work, and he is the only one in the world who can complete it in such a short period of time.
And now the entire fusion reactor is not running at full capacity, because with the current power consumption rate of the base, there is no need to run it at all.
During this period, apart from calling his family every few days to inquire, Wu Hao had almost no contact with the outside world. As for his documentary, it was also directly sent to several media outlets authorized by him very early on. The organization no longer needs him to post every week.
Now the record list of his shooting has been played almost halfway, which means that there are still about two months before Wu Hao has to start shooting.
However, the shooting work is also very simple for Wu Hao, and he can just treat it as a break in his free time.
Of course, all this would have to start before the entire base started to operate. After all, Wu Hao had to seize the time to develop a method for his father to completely eliminate cancer cells.
"The Chinese New Year will be here in about ten days, and it's time to go back then. However, I have to prepare a gift before I go back." Wu Hao thought of this and immediately paid attention to it. For his family, Health naturally comes first.
Therefore, now that Wu Hao has solved the base's energy problem, he can not only start designing and manufacturing the instruments needed for the biogenetic research laboratory, but he can also make other gadgets.
After all, a biogenetic research laboratory requires a lot of equipment, and the space inside the base is not enough. Wu Hao not only had to open up a new space again, but also spent a long time designing and manufacturing these research instruments.
It will definitely not be completed within a few months, and now that the New Year is coming soon, there is no need to be in such a rush to build the research laboratory.
So he planned to use the remaining ten days to tinker with the corresponding 3D printing equipment, and then make a special gift for his family.
With sufficient power supply, the 3D printing equipment Wu Hao wants to manufacture now is naturally no longer the semi-finished product. What he has to do this time is to use the previous semi-finished 3D printing equipment and cooperate with his own telekinesis to create products based on it. Several corresponding 3D printing equipment.
For example, a 3D metal printing equipment that can operate on its own must be at least 6 meters in length and 3 meters in height. It must have a fully sealed opening and closing hatch. This 3D printing equipment must be able to print various types of printing on its own. Large metal parts must also be equipped with integrated automated finishing equipment, such as drilling, milling, grinding and other finishing processes.
3D metal printing equipment with this function has already appeared abroad.
Of course, in addition to the 3D printing equipment that is specially used to process large metal parts, some smaller and more precise parts also require specialized 3D printing equipment.
It can be said that Wu Hao’s plan is to use these 3D printing equipment with different functions to complete the subsequent design and production of all parts and electronic components.
Three days later, Wu Hao finally completed the first 3D printing equipment. This 3D printing equipment is specially used to print various composite materials.
For example, plastics, resin materials, carbon fiber materials, etc. This equipment occupies a large area. It is a cuboid with a height of 2 meters, a width of 3 meters and a length of 5 meters. The maximum length of parts that can be processed is 4 meters.
However, there is no complete shell for packaging yet, but as soon as this machine starts running, a corresponding shell will be available soon.
This 3D printing equipment is specially used to print composite materials. The shell material used by Wu Hao is made of a new plastic material that he improved himself.
Soon, after Wu Hao finished adding the raw materials, he directly input the corresponding drawings into the computer program of the 3D printing equipment.
After two hours, all the shells of the 3D printing equipment were completed, and then Wu Hao quickly installed these shells directly through his mind!
"It's not bad. Although it can't achieve the effect I expected, it is barely enough for the initial stage." In fact, Wu Hao can make better 3D printing equipment with faster printing speed.
But if you want to do this, you must re-manufacture new nozzles and many related precision components. After all, these things were purchased by Wu Hao, and their capabilities can only reach the current level. If he wants to be better, he can Just make it yourself.
After the first 3D printing equipment was manufactured, Wu Hao stopped manufacturing equipment and started another design plan.
This design plan is the gift he wants to prepare for his family. This gift is nothing else but a simple and intelligent robot.
To put it simply, Wu Hao is planning to build a health robot 'Baymax' similar to one that appears in an anime film.
…