The Black Tech Monopoly Corporation

Chapter 228: NO.227 High offset metal

Views:

"Professor Yan, are there any results from this experiment?" As soon as Zhang Heng arrived, he saw the bright metal plate surrounded by everyone. A flash of surprise flashed in his eyes and he asked immediately.

"Yes, Director Zhang, but the specific effect needs to be tested before we know." Yan Ronghua nodded, as a greeting, and said lightly.

Zhang Heng didn't care about Yan Ronghua's attitude. Most scientists are arrogant, especially scientists of Yan Ronghua's level. If the other party was the kind of villain who is eager for fame and fortune, he would not have achieved what he has achieved today. If Zhang Heng hadn't spotted the opponent's weakness and threatened him with inducements, Yan Ronghua would definitely not have joined him.

Zhang Heng turned to look at the metal plate. At this time, a discerning assistant had already taken the metal plate from everyone's hands and presented it to Zhang Heng respectfully, ignoring the dissatisfied looks of the scientists around him.

Zhang Heng smiled and expressed his gratitude. He reached out and took the metal plate. He saw that the metal plate was only two or three millimeters thick. A discerning person could tell it was an ordinary aluminum plate at a glance. However, Zhang Heng knew that this aluminum plate was anything but. ordinary.

He grabbed both ends of the aluminum plate and pulled it hard. Originally, aluminum was a very soft material and only had a thickness of two to three millimeters. Any adult could easily bend it, but Zhang Heng casually pulled it. , the aluminum plate didn’t move at all!

The surprise in Zhang Heng's eyes became more intense. He continued to exert force. With his strength, not to mention aluminum plates, even ceramic tiles that were harder than steel could be easily broken. However, the aluminum plate in front of him was only slightly deformed until Zhang Heng used it. With most of the force, the aluminum plate was bent into an arc.

Seeing Zhang Heng's actions, everyone's eyes showed disappointment. Some people even sighed and began to scatter in all directions.

"It doesn't matter, we can continue to experiment." Yan Ronghua shook his head and said expressionlessly.

"Wait a minute." Zhang Heng knew that the other party mistakenly thought that the experiment had failed. He broke the aluminum plate back to a flat surface again, and then said, "Whether it has failed or not, we need to conduct a formal test to know, right?"

"Do we still need to test?" Yan Ronghua frowned, "If we can be bent by you, Director Zhang, it means we have failed. Theoretically, the hardness of high-deflection metal is several times higher than that of diamond, and it cannot be twisted by human power. "

"Then why don't you try it?" Zhang Heng returned the aluminum plate to the assistant and said without doubt, "As the director, I ask you to conduct a process inspection immediately."

Yan Ronghua frowned, but when he thought that the other party had cured his daughter, he finally relented and said, "Okay, I'll listen to you."

With that said, Yan Ronghua turned and looked at everyone, "Xiao Liu, Xiao Wang, you bring the metal plate to the experimental isolation room, and we will conduct the first process inspection immediately."

Soon, the aluminum plate was taken to the isolation room. In the isolation room, there are many kinds of testing devices, such as corrosion resistance testing device, hardness testing device, strength testing device, etc. The first choice is to put the aluminum plate on the hardness testing machine.

After all, this was the first time for everyone to create high-deflection metal. When they saw the inspection started, all the scientists gathered outside the isolation room and looked inside through the observation window. They saw that under the operation of an assistant, a constantly rotating The cutting equipment is turned on, and the disc-shaped cutting blade rotates at high speed. At the same time, the assistant presses the instrument down hard and cuts directly on the aluminum plate!

Suddenly, a huge noise came, and at the same time, a large amount of fire exploded from the aluminum plate, and sparks flew everywhere!

After cutting for about a few seconds, the assistant lifted the cutting machine again. Then he looked down at the aluminum plate, but the next second, he showed a look of astonishment.

"How's it going?" Yan Ronghua asked immediately.

"Professor Yan, there are no scratches on the aluminum plate!" the assistant said in surprise as he took out the aluminum plate from the fixture and raised it to everyone.

"What?" Yan Ronghua was shocked. Regardless of the danger, he ran into the testing isolation room, took the aluminum plate from his assistant, and looked up along the light - as expected, after the high-speed cutting just now, the aluminum plate was still smooth and smooth. Look, there is no trace of being cut!

"What kind of cutterhead are you using?" Yan Ronghua asked quickly.

"It is CR12MOV cold work abrasive steel, which can easily cut general steel." The assistant said as he took off the protective device on his head.

"Try using a tungsten-molybdenum general-purpose high-speed steel cutterhead, and the cutting time will be extended to ten seconds!" Yan Ronghua said seriously.

"Okay." The assistant took the aluminum plate to another cutting machine and tried it again. There was another burst of fire and huge noises, but this time the assistant stopped in less than seven seconds.

"Why did you stop?" Yan Ronghua frowned.

The assistant suddenly smiled bitterly, "Professor Yan, the knife disk is destroyed..."

"What!" At this time, not only Yan Ronghua was shocked, but more scientists couldn't wait to run into the isolation room and rushed to look at the cutterhead. Everyone was a little shocked.

In just seven seconds, the blade on the cutterhead was worn away. Not only that, there were still no scratches on the aluminum plate!

"This..." Yan Ronghua was also a little confused about the situation. He looked back at Zhang Heng outside the isolation room, as if he was unconvinced, "Use a diamond cutterhead! I still don't believe it!"

The assistant nodded helplessly and replaced it with a new cutterhead. The blades on this cutterhead were inlaid with tiny diamonds. Even glass, which is harder than metal, could be easily cut. However, when the third cut was made, After finishing, everyone immediately gathered around, but they were shocked to find that there were still no traces on the aluminum plate! Not even a hint of wear!

"hiss!"

Many people gasped subconsciously. Yan Ronghua also stared at all this blankly. He simply said again, "Test the metal strength and toughness, metal plasticity and tensile strength. Test them all for me!"

Next, there was naturally a comprehensive test, but as each test was completed, everyone looked at the aluminum plate more eagerly. After all the performance tests were completed, everyone looked at the aluminum plate. Completely changed!

"I see!"

One of the scientists lamented, “Because its neutron content is highly unbalanced, energy transfer is very insensitive, and heat energy and fluctuations are basically unable to be transferred on the metal. Moreover, it has a hardness that exceeds diamonds and a strength that exceeds that of titanium alloys. It can be said to be the best in the world. The strongest metal on earth, bar none!”

"Its corrosion resistance is also very superior. It is a perfect metal that can completely change the entire human industry!" Another scientist also expressed his opinion.

"But don't forget, its cost is also amazing, and it is also the most precious metal in the world!" said the third scientist.

For a time, everyone sighed that an unprecedented metal was in front of them, and they also participated in the manufacturing process of the metal. Everyone looked very satisfied, and they knew that they had made history!

However, only Yan Ronghua seemed to have thought of something. His expression changed and he turned to look at Zhang Heng. However, it was only then that he realized that Zhang Heng had left at some point...

Sighing secretly, Yan Ronghua finally understood why Zhang Heng had already bent the metal before, but still asked him to test it.

It's not that the high-deflection metal production failed, but Zhang Heng's power is beyond the reach of ordinary people!

Thinking of this, Yan Ronghua's eyes flashed with shock and awe, and he soon buried this shock deeply in his heart.