Wu Zen used a pencil to draw the outline of the weapon on the surface of the fang - the curve of the fang itself can be converted into a blade, so only the back of the knife needs to be drawn. Next to the back of the knife is a complete axe. Draw the armor plates on the widest and thickest part of the fangs.
The experienced swordsmith provided Wu Chan with revision suggestions, and an hour later, the final outline draft was confirmed. The next step is to cut the tusks.
In the past ten years, whale-level monsters have only occasionally appeared in the Ultimate Zombie Tide every year in December. This means that only very few swordsmiths have come into contact with the materials of whale-level monsters. The three licensed knifesmiths on site have not listed among them. Today is the day when they first come into contact with whale-level monster material. It is the day when their career takes a big step forward. After today, their worth will definitely increase.
When cutting the fangs of a whale-level monster for the first time, they first tried the most common flame cutting method.
A cutter puts on his mask, unscrews the gas bottle, and the cutting gun spurts out flames.
Wu Chan has a certain understanding of the principles of flame cutting. The essence of the visual "cutting" action is a kind of "blowing sand". The gas flame first preheats the steel plate to the ignition point of the steel, and then injects a high-pressure oxygen flow to cause the steel to burn violently, forming oxide slag, which is finally blown away by the high-pressure oxygen flow to cause slits.
However, the fangs of the whale-level monster can condense thunder and lightning, and the temperature of the flame cannot make it burn.
Wu Chan knew this but did not reveal it because he would not dictate the work of professionals.
The flames of the cutting gun licked the fangs with a whirring sound, just like a spare tire pursuing the goddess of the high mountains with passion, trying its best, but could not even open a hair-thin breakthrough. If Cutting Gun turned around at this time, he would find that his childhood sweetheart, the oxygen bottle, which had always been supporting him, was silently enduring the extreme cold caused by the oxidation of liquid oxygen absorbing a large amount of heat, condensing a layer of frost.
Even the knifemaker couldn't bear this humiliation, so he turned off the cutting gun and officially gave up the flame cutting method.
The three swordsmiths discussed it and came to the same conclusion as Wu Zen: fangs have extremely high fire resistance. If this is the case, then a plasma cutting machine that uses the heat of a high-temperature plasma arc to melt metal will not be effective.
A more enthusiastic backup will only waste more emotions and resources than an enthusiastic backup.
So they finally moved out the rich and handsome man in the cutting world - Dragon Blade Wheel.
High, extremely efficient; rich, extremely expensive; handsome, with extremely beautiful textures like natural crystal cracks.
The Dragon Blade Wheel is made from the wing membrane of the Dragon Blade Giant. This translucent wing membrane has excellent metal-like toughness, is extremely thin and sharp, and is the first choice knife forging material pursued by many sword masters. It is a perfect match for the fangs of a whale-level monster.
Insert the canned coolant into the cooling device at the head of the long rod cutter like a bullet, and connect the black cable to the tail end. A knife maker raised a long cutter with both arms, his bulging biceps bursting out of his cuffs, as if he was holding an electric guitar upside down.
When the power is turned on, the dragon blade wheel on the top of the cutter rotates rapidly and shines brightly.
With a hissing sound, the Dragon Blade Wheel entered Tuya's body.
The well-matched couple finally got married, and the spare child witnessed the pain with his own eyes.
The long-pole cutter weighs 20 kilograms, is top-heavy, and puts a great strain on the user's physical strength. Using a cutter to cut steadily along the hook line is where the licensed knife maker shows the difference in strength from ordinary craftsmen.
Two minutes later.
The first bladesmith was exhausted.
The Dragon Blade wheel stopped rotating, leaving only a five centimeter-deep gash on the fangs dripping with coolant.
At the same time, the Dragon Blade Wheel was enough to cut through three arms-thick stone pillars and fifteen ape-level demons neatly connected in a row.
According to this progress, even if the three knifemakers worked non-stop alternately, it would take at least a whole day to complete the initial cutting of the tusk according to the outline. As for the subsequent fine cutting of details, it is impossible to estimate the time.
It wasn't that Wu Chan didn't want to wait, but he felt that his time was wasted.
He stopped the second knife maker who was raising the long pole cutter and was about to start cutting: "Master knife maker, please wait a moment, I have a more efficient way."
"What can I do?" the knifemaker asked.
Long Sui had already guessed the answer.
It seems that everyone has overlooked a question - how can this piece of fang, which is difficult to cut even with a dragon blade wheel, be neatly cut in half from the middle
Was it cut open by the Shinra Seraph Archangel
No.
The person who cut open the fangs was Wu Chan.
To see exactly how Wu Zen cut the fangs was the real purpose of Long Sui coming to the forge in person.
Wu Zen said: "Use super powers."
Long Sui became excited.
The knife maker glanced at Long Sui, who nodded.
The knife maker handed the handle of the long cutter to Wu Chan, but Wu Chan didn't take it: "It's not for me, it's for her."
Um
Everyone was stunned.
Wu Chan looked at Gong Tiantian.
Even Gong Tiantian herself was confused.
"I don't have the skills of a knife maker."
This is quite self-aware.
Only craftsmen who have worked for more than three years are eligible to take the swordsmith's license examination. After passing the preliminary examination, it will take another two years to officially become a licensed swordsmith.
To use this long pole cutter that weighs twenty kilograms and is top-heavy. In addition to strong wrist and arm strength, you also need a full year of solid basic skills. Otherwise, even if you can lift a long pole cutter, it will be difficult to cut a straight line, let alone various complex curves.
Regardless of whether Gong Tiantian has ever tried any technical work related to craftsmen, it is impossible for her to lift the long pole cutter with her seemingly slender little arms.
"I don't want you to have skills, I just need you to be able to move." Wu Chan said.
"It's not difficult." Gong Tiantian walked over. The knife maker handed over the long cutter doubtfully, and then watched the girl lift it up easily.
"Then." Gong Tiantian put the long pole cutter on her shoulder.
"Learn how to use it." Wu Chan said.
"Huh?" Gong Tiantian didn't understand.
"Ask her for advice." Wu Chan said to the swordsmith.
The swordsman looked at Longsui again, and Longsui nodded again.
"Teach her."
"This is the power switch, this is the switch of the cooling device. First spray the coolant, and then use the dragon blade wheel to cut the workpiece... "
The difficulty in using a long pole cutter is not the operation process, so Gong Tiantian learned it immediately.
"Find a piece of wood and let her try it." Wu Chan said.
With the previous two foreshadowings, this time the swordsman did not ask for Long Sui's consent and directly followed Wu Zen's instructions. Two people moved a three-meter-long wooden board and laid it flat on the workbench.
"Cut a straight line." Wu Chan said.
Gong Tiantian pressed the power of the cutter, and the rapidly rotating dragon wheel rolled along a straight line to the bottom, cutting a piece of wood straight without any wood chips splattering.
"If you can cut wooden boards, you can cut tusks. This is just simple physical labor." Wu Zen said.
Gong Tiantian could already guess what the boss meant.
"I need you to complete the preliminary cutting according to the pencil outline on the fangs within two hours." Wu Chan said.
"..." Gong Tiantian.
Even if a girl could lift a long pole cutter, it would be impossible for her to work continuously, not to mention the hardness of the fangs themselves.
Two hours
Stop messing around!
Sure enough, the girl put down the long pole cutter, found a chair and sat down lazily, and then took out a novel from her pocket.
"Thankfully I went out to take it."
"???" Three swordsmiths.
"???" Long Sui.
Reading novels in a forge, is this something a normal person can think of
"Mr. Wu, what does this mean?" Long Sui couldn't help but ask.
"Are there any entertainment items here?" Wu Chan said, "For example, poker or something like that."
People who do hard work like to gamble, and the forge is no exception.
Long Sui, the three swordsmiths, Wu Chan and Gan Xiaoyi actually started playing poker.
One hour and thirty minutes passed.
One hour and forty minutes passed.
One hour and fifty minutes passed.
Long Sui, who was once a professional gambler, was the biggest loser. In several rounds, he had obviously obtained a sure winning card through cheating, but in the end, he was killed by Wu Chan in a desperate situation. What Long Sui couldn't understand the most was that Wu Chan didn't go all out at all. He wore headphones while listening to music and playing cards at the same time, trying to win everyone's money. As if possessed by the God of Gamblers, Wu Zen becomes even more mysterious in Long Sui's heart!
Gong Tiantian closed the novel, stood up from the chair, raised the long pole cutter with both arms, walked to the fang, and pressed the power button.
Zi'er—
Zi'er—
The last ten minutes.
It's ten minutes of Gong Tiantian's personal performance.
It was ten minutes that the three swordsmiths were stunned.
The fangs of the whale-level monster are like a person whose bones have been melted away by glory and wealth, allowing the Dragon Blade Wheel to criss-cross his body unimpeded and split into pieces.
The preliminary segmentation according to the contour line was completed on time!
"Thank you for your hard work." Wu Chan said.
Gong Tiantian, who was all hot and steamy, rolled her eyes at him angrily.
she.
Gong Tiantian, a seventeen-year-old beautiful girl in her prime and the first heir to the Gong Family Martial Arts School, will one day become a CNC machine tool! ! !
The boss Wu Chan is not a human being at all, he is a devil!
But the three knifemakers were more seriously injured than Gong Tiantian.
Today is the first day they come into contact with whale-level monster material, and their careers have taken a huge step back...