Zhuge Kong Ming and the Outsider

Chapter 45: Yuan Rong's crossbow reappears

Views:

Ironwood and fine steel are two materials with different properties, so their fusion is naturally quite difficult.

If you are an experienced forger, you may be more confident in fusing ironwood and fine steel, but for Kong Ming, who is trying forging for the first time, can he succeed in one go

The iron wood and fine steel that had been refined into juice slowly came together in the forming area, wrapped in two groups of Yuanli flames.

Previously, when Kong Ming used the Yuanli flame to refine four materials at the same time, other than the need for distraction, there seemed to be no other trouble. However, when the two refined materials were about to come together, a powerful fire elemental force suddenly burst out, almost causing an explosion in the fire pool!

It turns out that in the process of refining materials, whether it is fine steel or iron wood, they absorb a large amount of fire element energy before they liquefy. And the fire element force is the most violent among the basic five elements. Although the fire element power contained in the two different materials was both created by Kong Ming, changes occurred during the refining process. Now the two collide, like sparks hitting the earth, and the explosion is almost imminent. !

For ordinary forgers, suppressing the mutations that occur when fusing different materials is the biggest difficulty in the forging process!

The forger must not only have a thorough understanding of the properties of the forging materials, but also have to reach a superb level of control over the elemental power in order to resolve the crisis and allow the fusion to be completed smoothly!

But Kong Ming is different from ordinary forgers. He has the special physique of the dual spirit body of wood and fire. Why are dual-system practitioners more suitable to become forgers? At this moment, it can be said that it is absolutely obvious!

Seeing that the violent fire element force was about to explode, Kong Ming concentrated his mind and poured a pure wood element force into the fire pool!

The elemental force of the wood element represents vitality and has always been neutral and peaceful, which can exactly alleviate the violent force of the elemental force of the fire element. Moreover, adding wood elemental energy to fire elemental energy is equivalent to adding fuel to the fire and increasing the power of fire elemental energy in fusion!

As the two elements merged into one, the integration step in the forging process was finally completed as smoothly as a matter of course!

The two liquids of iron wood and fine steel merged together without distinction, and then slowly formed in the mold.

As for the century-old arrow bamboo and arrow feathers, they were forged successfully in the first step! Under the fusion of Yuanli, the arrow feathers were firmly attached to the arrow shaft, and then they were grouped into groups of ten to form a set of crossbow gates!

The most exquisite thing about Yuanrong's crossbow is that the crossbow body and crossbow arrows are separated. The crossbow gate composed of ten crossbow arrows can be freely disassembled and assembled on the crossbow body. As long as the crossbow gate is replaced in time, a steady stream of crossbow arrows can be fired!

If it didn't have such terrifying power, how could Yuan Rong's crossbow become the number one killing weapon in the cold weapon era

Since most of the mechanism structure of Yuan Rong's crossbow is concentrated on the crossbow body, the precision is much more complicated, and the molding time is naturally much later than that of the crossbow arrow. Fortunately, Kong Ming was able to forge it with the elemental power of wood and fire, so there were no surprises during the fusion process, and the final shape was a matter of course!

Kong Ming has been forging for more than an hour. Considering his cultivation as a high-level Yuanshi, it is really not easy for him to be able to persist for such a long time!

Suddenly, the top cover of the fire pool flicked upward, and several green and red rays of light spurted out from the fire pool, just suspended in the air.

The green and red light is composed of wood elemental power and fire elemental power, and the object wrapped in these two elemental powers is naturally the Yuanrong crossbow forged by Kong Ming this time!

Kong Ming waved his hand in the air, and the green and red light returned to his body. Then, two rows of things were already arranged beside the fire pool.

One of the rows is a rectangular, tubular wooden gate-like object, with a total of twenty-one. It is the crossbow gate forged by Kong Ming and specially prepared for Yuan Rong's crossbow!

The success rate of forging Yuan soldiers is important. The materials Kong Ming initially put into the fire pool were proportioned to thirty pieces of crossbows. In the end, twenty-one pieces were forged, with a success rate of up to 70%. For the first time forging, For those who have made it, this success rate can be said to be extremely amazing!

However, forging a crossbow body is much more complicated than a crossbow gate, and the success rate cannot be so high. Kong Ming put in a total of ten materials for forging the crossbow body, but in the end only three pieces were formed, and the success rate dropped to 30%!

But compared to the success rate of at most 10% when ordinary forgers try forging for the first time, Kong Ming's performance this time can already be described as amazing!

For those with wisdom as high as Kong Ming, their understanding is naturally beyond the reach of ordinary people, and it is absolutely natural for them to excel in the art of forging!

Kong Ming picked up a crossbow body, loaded it with a crossbow arrow, and held it in front of his eyes to examine it.

The overall size of Yuan Rong's crossbow is not large, and an ordinary adult can hold it flat against his chest. The crossbow is equipped with a trigger. As long as the trigger is gently pulled, the ten crossbow arrows in the crossbow gate can be shot out at the same time! And with the power of the machine spring, even the Yuanrong crossbow made by Kong Ming during the Three Kingdoms era can penetrate leather armor within 150 steps!

The number one killer weapon in the cold weapon era is definitely well-deserved!

Now, what level of power will the Yuan Rong Crossbow reach, which has reached the level of Yuan Bing

Kong Ming held the Yuan Rong crossbow and walked out of the forging room, then stood fifty meters away and pointed the crossbow at a bare mountain wall!

With the movement of the elemental force in his body, Kong Ming poured a fire elemental force into Yuanrong's crossbow.

It can be said that the Yuan Bing-level Yuan Rong Crossbow built by Kong Ming has absolutely no problems in terms of quality. After absorbing a lot of fire element energy, not only is there no damage at all, but there is a faint red light all over the body!

Kong Ming pulled the trigger, and ten lightning-like red rays of light shot out instantly, hitting the mountain wall in the blink of an eye!

"Boom, boom, boom..." a series of explosions sounded like continuous beads. The mountain wall that was hit was filled with rocks and dust, as if the entire mountain wall was about to collapse!

The power of such a blow is almost equivalent to that of a mid-level elemental master's ultimate move with all his strength! Even a high-level elemental master would not dare to directly face such a powerful attack without dodging!

It can be seen that the Yuan Rong crossbow that reaches Yuan Bing quality is absolutely amazingly powerful, enough to increase the combat effectiveness of Kong Ming, a high-level Yuan warrior, across realms!

From a practical point of view, the Yuan Rong Crossbow is so powerful that it is no longer weaker than some low-level Yuan Bing spiritual weapons!

***********************************

PS: Brothers and sisters, I look forward to your clicks, recommendations, and collection support during the new book period! Especially recommendation votes, the more the merrier, thank you!

(End of chapter)