The expert Lu Zhou mentioned was naturally Xiao Ai.
This system is not reliable. The key lies in whether it can make something.
The next day, a truck from the Bureau of Science and Industry arrived at the Institute for Advanced Study.
[Where is my machine tool? Such a big one, who was here just now. (°ー°〃)]
As an academician of the Academy of Engineering and the chief engineer of Shenyang Machinery, Yang Zhongquan was naturally involved when the testing standards for this S-shaped specimen were formulated. It is no exaggeration to say that with his many years of experience, he can tell whether the entire set of machine tools will work if an S-type test piece is produced, and he can reach out and touch it.
As an academician of the Academy of Engineering and the chief engineer of Shenyang Machinery, Yang Zhongquan was naturally involved when the testing standards for this S-shaped specimen were formulated. It is no exaggeration to say that with his many years of experience, he can tell whether the entire set of machine tools will work if an S-type test piece is produced, and he can reach out and touch it.
At night, at the warehouse where the equipment was stored, a flat AGV logistics vehicle followed Lu Zhou through the door and walked around a few times on the flat ground filled with equipment. Seeing it scurrying around in the warehouse, Lu Zhou was about to ask what it was doing when the phone in his pocket vibrated.
Lu Zhou: "How would you like to test it?"
Lu Zhou walked over from the main entrance, without looking at Yang Zhongquan standing next to him, and spoke directly to Director Li.
When he flicked the cigarette ashes with his index finger, Yang Zhongquan said casually without raising his eyelids: "I won't embarrass you, just make an S-shaped test piece."
Seeing that there was no movement from the machine tool, Lu Zhou stuffed his phone back into his pocket, looked at Yang Zhongquan, and said with a smile.
[Where is my machine tool? Such a big one, who was here just now. (°ー°〃)]
However, before he could ask in detail, Yang Zhongquan beside him laughed casually, "Oh? Who are you looking for?"
"It seems to be processed."
This basic operation is nothing to brag about. Many machine tools equipped with imported ceramic bearings and Nissan systems can also do it, not to mention the latest five-axis machine tool from Siemens.
"Speaking", the AGV logistics vehicle turned around in the open space and gestured at the size of the equipment.
After a long time, a few characters appeared on the phone screen.
"You don't need to remind me."
Looking at the message on the screen, Lu Zhou felt a little embarrassed even though he felt that he was quite thick-skinned. He scratched his cheek and said.
…
"It seems to be processed."
Lu Zhou: "How would you like to test it?"
…
"Well, another one was borrowed."
Thinking of this, Yang Zhongquan's brows relaxed again, returning to his previous calm look.
"I told you that you don't believe in evil, so you can test it yourself and see if it works."
Then, Lu Zhou, who was standing aside, saw him extend his index finger and lightly touch the S-shaped specimen, and his expression suddenly changed.
This system is not reliable. The key lies in whether it can make something.
After walking to the control terminal and standing for a while, Lu Zhou pretended to touch it twice and then pressed the start button.
Although he always felt that this sentence was full of flaws, he couldn't think of a better place to start complaining.
The AGV logistics vehicle that was rushing back and forth suddenly stopped.
"Well, another one was borrowed."
Standing next to the machine tool and observing, I saw that the wrinkles on the old man's forehead were getting deeper.
Lu Zhou: "How would you like to test it?"
"I told you that you don't believe in evil, so you can test it yourself and see if it works."
But just one.
"Speaking", the AGV logistics vehicle turned around in the open space and gestured at the size of the equipment.
Xiao Ai: [It is difficult to buy QAQ using the same method]
"Well, another one was borrowed."
After a long time, a few characters appeared on the phone screen.
Seeing that there was no movement from the machine tool, Lu Zhou stuffed his phone back into his pocket, looked at Yang Zhongquan, and said with a smile.
Whether a CNC system is excellent or not is reflected in this kind of detail.
Fortunately, although he didn't understand it, Xiao Ai next to him did.
Fortunately, although he didn't understand it, Xiao Ai next to him did.
However, while there are advantages, the weaknesses are also fatal. High-speed cutting may cause broken blades and melted and scorched parts.
As the button was pressed, the machine tool lying in the warehouse suddenly moved like a beast that was ready to go. I saw the tool connected to the spindle rotating at high speed, and the solid cubic blank fixed on the workbench was like a collapsed snow peak, peeling off a large amount of metal debris.
[QAQ]
Normally, this high-speed cutting needs to be coordinated with the corresponding feed speed, keeping both within a certain range, so that the processing accuracy, smoothness, tool life, etc. can be optimized.
After walking to the control terminal and standing for a while, Lu Zhou pretended to touch it twice and then pressed the start button.
Ignoring the pitiful expression, Lu Zhou coughed lightly and said, "There's no point in pretending to be pitiful. There's only one left, so let's make do with it... How about I give you some more money and you go buy another one?" .”
Lu Zhou: "How would you like to test it?"
Lu Zhou: "...?"
"I told you that you don't believe in evil, so you can test it yourself and see if it works."
[Where is my machine tool? Such a big one, who was here just now. (°ー°〃)]
Lu Zhou: "...?"
However, while there are advantages, the weaknesses are also fatal. High-speed cutting may cause broken blades and melted and scorched parts.
Xiao Ai: [It is difficult to buy QAQ using the same method]
Ignoring the pitiful expression, Lu Zhou coughed lightly and said, "There's no point in pretending to be pitiful. There's only one left, so let's make do with it... How about I give you some more money and you go buy another one?" .”
"I'll find someone to install the CNC system."
Lu Zhou: "..."
Normally, this high-speed cutting needs to be coordinated with the corresponding feed speed, keeping both within a certain range, so that the processing accuracy, smoothness, tool life, etc. can be optimized.
Fortunately, although he didn't understand it, Xiao Ai next to him did.
Lu Zhou: "..."
"Who installed this system for you?"
Something's not quite right.
Lu Zhou: "Then please get familiar with it as soon as possible..."
Is it done
After a moment of pause, Lu Zhou changed the topic and spoke.
Thinking about it, if they were killed in the same tree, those people engaged in intelligence work would be too stupid.
The AGV logistics vehicle that was rushing back and forth suddenly stopped.
However, before he could ask in detail, Yang Zhongquan beside him laughed casually, "Oh? Who are you looking for?"
"Who installed this system for you?"
Lu Zhou walked over from the main entrance, without looking at Yang Zhongquan standing next to him, and spoke directly to Director Li.
Whether a CNC system is excellent or not is reflected in this kind of detail.
However, before he could ask in detail, Yang Zhongquan beside him laughed casually, "Oh? Who are you looking for?"
Lu Zhou walked over from the main entrance, without looking at Yang Zhongquan standing next to him, and spoke directly to Director Li.
But just one.
The benefits of high-speed cutting are obvious. The high-speed removal of chips reduces the cutting force and thermal stress deformation of the workpiece, improves the possibility of cutting rigid and thin-walled parts, and the smoothness of the processed parts will be very high.
Lu Zhou: "How would you like to test it?"
It was estimated that Lu Zhou copied a copycat system from somewhere and installed it. Yang Zhongquan did not get angry with him. Yun Danfeng lightly lit a cigarette and glanced at the machine tool with squinted eyes.
It was estimated that Lu Zhou copied a copycat system from somewhere and installed it. Yang Zhongquan did not get angry with him. Yun Danfeng lightly lit a cigarette and glanced at the machine tool with squinted eyes.
It wouldn't be a loss if one machine tool could be replaced by a launch site, not to mention the remaining one should be enough, it would just take more time at most.
Thinking of this, Yang Zhongquan's brows relaxed again, returning to his previous calm look.
Although he always felt that this sentence was full of flaws, he couldn't think of a better place to start complaining.
Something's not quite right.
After a moment of pause, Lu Zhou changed the topic and spoke.
The next day, a truck from the Bureau of Science and Industry arrived at the Institute for Advanced Study.
"I told you that you don't believe in evil, so you can test it yourself and see if it works."
"Xiao Ai, these devices you bought are not equipped with systems?"
This basic operation is nothing to brag about. Many machine tools equipped with imported ceramic bearings and Nissan systems can also do it, not to mention the latest five-axis machine tool from Siemens.
However, while there are advantages, the weaknesses are also fatal. High-speed cutting may cause broken blades and melted and scorched parts.
The speed of this tool is estimated to be at least tens of thousands...
It can be said that this S-type test piece is one of the prides of the domestic machine tool industry.
The benefits of high-speed cutting are obvious. The high-speed removal of chips reduces the cutting force and thermal stress deformation of the workpiece, improves the possibility of cutting rigid and thin-walled parts, and the smoothness of the processed parts will be very high.
[QAQ]
Xiao Ai: [Why do you need to install the system? Isn’t this kind of thing easy to use? 0.0]
Xiao Ai: [It is difficult to buy QAQ using the same method]
This system is not reliable. The key lies in whether it can make something.
Lu Zhou: "..."
If you can't make it, or if it turns out to be a defective product, it will be useless even if you spin the knife into the sky.
Looking at the message on the screen, Lu Zhou felt a little embarrassed even though he felt that he was quite thick-skinned. He scratched his cheek and said.
Although he always felt that this sentence was full of flaws, he couldn't think of a better place to start complaining.
After walking to the control terminal and standing for a while, Lu Zhou pretended to touch it twice and then pressed the start button.
"Xiao Ai, these devices you bought are not equipped with systems?"
"It seems to be processed."
The hand holding the S-shaped specimen was shaking slightly, and Yang Zhongquan spoke intermittently with a trembling voice.
But if you think about it carefully, it actually makes sense for Xiao Ai to say this. After all, you can file a Transformer out of something as rough as an industrial robot. If you use a more professional industrial machine tool, it won't be a big problem, right
Fortunately, although he didn't understand it, Xiao Ai next to him did.
The speed of this tool is estimated to be at least tens of thousands...
Whether a CNC system is excellent or not is reflected in this kind of detail.
"Speaking", the AGV logistics vehicle turned around in the open space and gestured at the size of the equipment.
Xiao Ai: [No, I will use it carefully. (.▽.)]
But if you think about it carefully, it actually makes sense for Xiao Ai to say this. After all, you can file a Transformer out of something as rough as an industrial robot. If you use a more professional industrial machine tool, it won't be a big problem, right
Looking at this scene, Yang Zhongquan frowned and his cloudy eyes narrowed slightly.
Of course, although he believed in Xiao Ai's abilities, Lu Zhou still asked just in case out of worry.
"I told you that you don't believe in evil, so you can test it yourself and see if it works."
Standing next to the control terminal, Lu Zhou, who didn't know much about this stuff in the first place, simply took out his mobile phone and continued to read the paper he hadn't finished last night, turning a deaf ear to what was going on in the warehouse. After about ten minutes, the high-speed rotating tool stopped, and a metal piece twisted into an S shape lay on the workbench.
The expert Lu Zhou mentioned was naturally Xiao Ai.
The expert Lu Zhou mentioned was naturally Xiao Ai.
However, just by rubbing it, the entire expression on his face changed.
As the button was pressed, the machine tool lying in the warehouse suddenly moved like a beast that was ready to go. I saw the tool connected to the spindle rotating at high speed, and the solid cubic blank fixed on the workbench was like a collapsed snow peak, peeling off a large amount of metal debris.
"You won't damage the machine tool by messing around like this, right?"
Xiao Ai: [Hmm, master, don’t worry and leave it to me!]
The next day, a truck from the Bureau of Science and Industry arrived at the Institute for Advanced Study.
Looking at this scene, Yang Zhongquan frowned and his cloudy eyes narrowed slightly.
Xiao Ai: [No, I will use it carefully. (.▽.)]
So fast
However, just by rubbing it, the entire expression on his face changed.
The expert Lu Zhou mentioned was naturally Xiao Ai.
When he flicked the cigarette ashes with his index finger, Yang Zhongquan said casually without raising his eyelids: "I won't embarrass you, just make an S-shaped test piece."
It can be said that this S-type test piece is one of the prides of the domestic machine tool industry.
Lu Zhou: "Then please get familiar with it as soon as possible..."
"Well, another one was borrowed."
The benefits of high-speed cutting are obvious. The high-speed removal of chips reduces the cutting force and thermal stress deformation of the workpiece, improves the possibility of cutting rigid and thin-walled parts, and the smoothness of the processed parts will be very high.
Lu Zhou: "Then please get familiar with it as soon as possible..."
It can be said that this S-type test piece is one of the prides of the domestic machine tool industry.
But if you think about it carefully, it actually makes sense for Xiao Ai to say this. After all, you can file a Transformer out of something as rough as an industrial robot. If you use a more professional industrial machine tool, it won't be a big problem, right
It can be said that this S-type test piece is one of the prides of the domestic machine tool industry.
Whether a CNC system is excellent or not is reflected in this kind of detail.
As the button was pressed, the machine tool lying in the warehouse suddenly moved like a beast that was ready to go. I saw the tool connected to the spindle rotating at high speed, and the solid cubic blank fixed on the workbench was like a collapsed snow peak, peeling off a large amount of metal debris.
Lu Zhou walked over from the main entrance, without looking at Yang Zhongquan standing next to him, and spoke directly to Director Li.
Lu Zhou: "Then please get familiar with it as soon as possible..."
After a moment of pause, Lu Zhou changed the topic and spoke.
Xiao Ai: [Hmm, master, don’t worry and leave it to me!]
It wouldn't be a loss if one machine tool could be replaced by a launch site, not to mention the remaining one should be enough, it would just take more time at most.
The speed of this tool is estimated to be at least tens of thousands...
Warm!
…
As the button was pressed, the machine tool lying in the warehouse suddenly moved like a beast that was ready to go. I saw the tool connected to the spindle rotating at high speed, and the solid cubic blank fixed on the workbench was like a collapsed snow peak, peeling off a large amount of metal debris.
But if you think about it carefully, it actually makes sense for Xiao Ai to say this. After all, you can file a Transformer out of something as rough as an industrial robot. If you use a more professional industrial machine tool, it won't be a big problem, right
The expert Lu Zhou mentioned was naturally Xiao Ai.
Of course, being able to maintain such a high rotational speed without breaking the knife was just a win in Yang Zhongquan's eyes.
Thinking about it, if they were killed in the same tree, those people engaged in intelligence work would be too stupid.
[QAQ]
Lu Zhou: "Then please get familiar with it as soon as possible..."
Lu Zhou: "..."
The next day, a truck from the Bureau of Science and Industry arrived at the Institute for Advanced Study.
At the same time, this S-type test piece is also the only ISO testing standard for high-end machine tools developed by China so far. Prior to this, ISO standards were completely controlled by countries such as Germany, Italy, France, and Japan.
Whether a CNC system is excellent or not is reflected in this kind of detail.
A group of people came to the warehouse again, preparing to load the machine tools into the truck.
The next day, a truck from the Bureau of Science and Industry arrived at the Institute for Advanced Study.
The AGV logistics vehicle that was rushing back and forth suddenly stopped.
Xiao Ai: [Why do you need to install the system? Isn’t this kind of thing easy to use? 0.0]
Xiao Ai: [No, I will use it carefully. (.▽.)]
After a moment of pause, Lu Zhou changed the topic and spoke.
This basic operation is nothing to brag about. Many machine tools equipped with imported ceramic bearings and Nissan systems can also do it, not to mention the latest five-axis machine tool from Siemens.
Whether a CNC system is excellent or not is reflected in this kind of detail.
Ignoring the pitiful expression, Lu Zhou coughed lightly and said, "There's no point in pretending to be pitiful. There's only one left, so let's make do with it... How about I give you some more money and you go buy another one?" .”
Lu Zhou walked over from the main entrance, without looking at Yang Zhongquan standing next to him, and spoke directly to Director Li.
After a long time, a few characters appeared on the phone screen.
Xiao Ai: [Why do you need to install the system? Isn’t this kind of thing easy to use? 0.0]
"I'll find someone to install the CNC system."
"Well, another one was borrowed."
This system is not reliable. The key lies in whether it can make something.
Seeing the change in his expression, Lu Zhou didn't quite understand what he was thinking. He just smiled and teased: "Is it burnt? Why don't you blow it off first?"
Several engineers standing around had surprised expressions on their faces.
Upon hearing this, Director Li was so shocked that the cigarette butt on his finger almost fell to the ground.
"Speaking", the AGV logistics vehicle turned around in the open space and gestured at the size of the equipment.
The next day, a truck from the Bureau of Science and Industry arrived at the Institute for Advanced Study.
"It seems to be processed."
It wouldn't be a loss if one machine tool could be replaced by a launch site, not to mention the remaining one should be enough, it would just take more time at most.
The speed of this tool is estimated to be at least tens of thousands...
"It seems to be processed."
However, before he could ask in detail, Yang Zhongquan beside him laughed casually, "Oh? Who are you looking for?"
If an inferior machine tool breaks a tool when processing parts, it is not necessarily due to the quality of the tool or bearing itself. At least half of the possibility is that it is caused by the CNC system.
Then, Lu Zhou, who was standing aside, saw him extend his index finger and lightly touch the S-shaped specimen, and his expression suddenly changed.
Xiao Ai: [No, I will use it carefully. (.▽.)]
Lu Zhou replied with a straight face: "State secrets."
"Well, another one was borrowed."
As an academician of the Academy of Engineering and the chief engineer of Shenyang Machinery, Yang Zhongquan was naturally involved when the testing standards for this S-shaped specimen were formulated. It is no exaggeration to say that with his many years of experience, he can tell whether the entire set of machine tools will work if an S-type test piece is produced, and he can reach out and touch it.
It was estimated that Lu Zhou copied a copycat system from somewhere and installed it. Yang Zhongquan did not get angry with him. Yun Danfeng lightly lit a cigarette and glanced at the machine tool with squinted eyes.
But just one.
Normally, this high-speed cutting needs to be coordinated with the corresponding feed speed, keeping both within a certain range, so that the processing accuracy, smoothness, tool life, etc. can be optimized.
This basic operation is nothing to brag about. Many machine tools equipped with imported ceramic bearings and Nissan systems can also do it, not to mention the latest five-axis machine tool from Siemens.
As an academician of the Academy of Engineering and the chief engineer of Shenyang Machinery, Yang Zhongquan was naturally involved when the testing standards for this S-shaped specimen were formulated. It is no exaggeration to say that with his many years of experience, he can tell whether the entire set of machine tools will work if an S-type test piece is produced, and he can reach out and touch it.
This system is not reliable. The key lies in whether it can make something.
"I told you that you don't believe in evil, so you can test it yourself and see if it works."
"Well, another one was borrowed."
What is the S-type test piece
It can be said that this S-type test piece is one of the prides of the domestic machine tool industry.
This system is not reliable. The key lies in whether it can make something.
Lu Zhou: "How would you like to test it?"
Upon hearing this, Director Li was so shocked that the cigarette butt on his finger almost fell to the ground.
Whether a CNC system is excellent or not is reflected in this kind of detail.
When he flicked the cigarette ashes with his index finger, Yang Zhongquan said casually without raising his eyelids: "I won't embarrass you, just make an S-shaped test piece."
Seeing that there was no movement from the machine tool, Lu Zhou stuffed his phone back into his pocket, looked at Yang Zhongquan, and said with a smile.
Thinking about it, if they were killed in the same tree, those people engaged in intelligence work would be too stupid.
Then, Lu Zhou, who was standing aside, saw him extend his index finger and lightly touch the S-shaped specimen, and his expression suddenly changed.
However, while there are advantages, the weaknesses are also fatal. High-speed cutting may cause broken blades and melted and scorched parts.
As the button was pressed, the machine tool lying in the warehouse suddenly moved like a beast that was ready to go. I saw the tool connected to the spindle rotating at high speed, and the solid cubic blank fixed on the workbench was like a collapsed snow peak, peeling off a large amount of metal debris.
This system is not reliable. The key lies in whether it can make something.
Warm!
The S-type test piece is a machine tool testing standard proposed by several experts from AVIC and the Academy of Engineering. It was first disclosed in the form of a patent. Later, because it can indeed play a special role in testing five-axis linkage CNC machine tools, it has become popular throughout the country. Major manufacturing plants and machine tool factories have been promoted.
As an academician of the Academy of Engineering and the chief engineer of Shenyang Machinery, Yang Zhongquan was naturally involved when the testing standards for this S-shaped specimen were formulated. It is no exaggeration to say that with his many years of experience, he can tell whether the entire set of machine tools will work if an S-type test piece is produced, and he can reach out and touch it.
If you can't make it, or if it turns out to be a defective product, it will be useless even if you spin the knife into the sky.
Yang Zhongquan responded coldly and walked towards the machine tool with a frown.
At the same time, this S-type test piece is also the only ISO testing standard for high-end machine tools developed by China so far. Prior to this, ISO standards were completely controlled by countries such as Germany, Italy, France, and Japan.
This basic operation is nothing to brag about. Many machine tools equipped with imported ceramic bearings and Nissan systems can also do it, not to mention the latest five-axis machine tool from Siemens.
It was estimated that Lu Zhou copied a copycat system from somewhere and installed it. Yang Zhongquan did not get angry with him. Yun Danfeng lightly lit a cigarette and glanced at the machine tool with squinted eyes.
It can be said that this S-type test piece is one of the prides of the domestic machine tool industry.
It can be said that this S-type test piece is one of the prides of the domestic machine tool industry.
So fast
Fortunately, although he didn't understand it, Xiao Ai next to him did.
As an academician of the Academy of Engineering and the chief engineer of Shenyang Machinery, Yang Zhongquan was naturally involved when the testing standards for this S-shaped specimen were formulated. It is no exaggeration to say that with his many years of experience, he can tell whether the entire set of machine tools will work if an S-type test piece is produced, and he can reach out and touch it.
As the button was pressed, the machine tool lying in the warehouse suddenly moved like a beast that was ready to go. I saw the tool connected to the spindle rotating at high speed, and the solid cubic blank fixed on the workbench was like a collapsed snow peak, peeling off a large amount of metal debris.
If you can't make it, or if it turns out to be a defective product, it will be useless even if you spin the knife into the sky.
If you can't make it, or if it turns out to be a defective product, it will be useless even if you spin the knife into the sky.
As an academician of the Academy of Engineering and the chief engineer of Shenyang Machinery, Yang Zhongquan was naturally involved when the testing standards for this S-shaped specimen were formulated. It is no exaggeration to say that with his many years of experience, he can tell whether the entire set of machine tools will work if an S-type test piece is produced, and he can reach out and touch it.
Whether a CNC system is excellent or not is reflected in this kind of detail.
But if you think about it carefully, it actually makes sense for Xiao Ai to say this. After all, you can file a Transformer out of something as rough as an industrial robot. If you use a more professional industrial machine tool, it won't be a big problem, right
Of course, although he believed in Xiao Ai's abilities, Lu Zhou still asked just in case out of worry.
The speed of this tool is estimated to be at least tens of thousands...
The benefits of high-speed cutting are obvious. The high-speed removal of chips reduces the cutting force and thermal stress deformation of the workpiece, improves the possibility of cutting rigid and thin-walled parts, and the smoothness of the processed parts will be very high.
Xiao Ai: [No, I will use it carefully. (.▽.)]
Seeing the change in his expression, Lu Zhou didn't quite understand what he was thinking. He just smiled and teased: "Is it burnt? Why don't you blow it off first?"
Thinking about it, if they were killed in the same tree, those people engaged in intelligence work would be too stupid.
Lu Zhou: "...?"
"I'll find someone to install the CNC system."
Is it done
Seeing that there was no movement from the machine tool, Lu Zhou stuffed his phone back into his pocket, looked at Yang Zhongquan, and said with a smile.
The speed of this tool is estimated to be at least tens of thousands...
What is the S-type test piece
Fortunately, although he didn't understand it, Xiao Ai next to him did.
"You won't damage the machine tool by messing around like this, right?"
As the button was pressed, the machine tool lying in the warehouse suddenly moved like a beast that was ready to go. I saw the tool connected to the spindle rotating at high speed, and the solid cubic blank fixed on the workbench was like a collapsed snow peak, peeling off a large amount of metal debris.
When he flicked the cigarette ashes with his index finger, Yang Zhongquan said casually without raising his eyelids: "I won't embarrass you, just make an S-shaped test piece."
Standing next to the machine tool and observing, I saw that the wrinkles on the old man's forehead were getting deeper.
After walking to the control terminal and standing for a while, Lu Zhou pretended to touch it twice and then pressed the start button.
Fortunately, although he didn't understand it, Xiao Ai next to him did.
If an inferior machine tool breaks a tool when processing parts, it is not necessarily due to the quality of the tool or bearing itself. At least half of the possibility is that it is caused by the CNC system.
This system is not reliable. The key lies in whether it can make something.
This basic operation is nothing to brag about. Many machine tools equipped with imported ceramic bearings and Nissan systems can also do it, not to mention the latest five-axis machine tool from Siemens.
At the same time, this S-type test piece is also the only ISO testing standard for high-end machine tools developed by China so far. Prior to this, ISO standards were completely controlled by countries such as Germany, Italy, France, and Japan.
The benefits of high-speed cutting are obvious. The high-speed removal of chips reduces the cutting force and thermal stress deformation of the workpiece, improves the possibility of cutting rigid and thin-walled parts, and the smoothness of the processed parts will be very high.
But just one.
After walking to the control terminal and standing for a while, Lu Zhou pretended to touch it twice and then pressed the start button.
But if you think about it carefully, it actually makes sense for Xiao Ai to say this. After all, you can file a Transformer out of something as rough as an industrial robot. If you use a more professional industrial machine tool, it won't be a big problem, right
If you can't make it, or if it turns out to be a defective product, it will be useless even if you spin the knife into the sky.
As the button was pressed, the machine tool lying in the warehouse suddenly moved like a beast that was ready to go. I saw the tool connected to the spindle rotating at high speed, and the solid cubic blank fixed on the workbench was like a collapsed snow peak, peeling off a large amount of metal debris.
The expert Lu Zhou mentioned was naturally Xiao Ai.
Lu Zhou: "...?"
Several engineers standing around had surprised expressions on their faces.
Without paying any attention to his teasing, Yang Zhongquan quickly turned the S-shaped specimen over, raised his calloused thumb, and rubbed it along the inner curved surface.
…
When he flicked the cigarette ashes with his index finger, Yang Zhongquan said casually without raising his eyelids: "I won't embarrass you, just make an S-shaped test piece."
The expert Lu Zhou mentioned was naturally Xiao Ai.
Looking at this scene, Yang Zhongquan frowned and his cloudy eyes narrowed slightly.
If an inferior machine tool breaks a tool when processing parts, it is not necessarily due to the quality of the tool or bearing itself. At least half of the possibility is that it is caused by the CNC system.
The hand holding the S-shaped specimen was shaking slightly, and Yang Zhongquan spoke intermittently with a trembling voice.
Without paying any attention to his teasing, Yang Zhongquan quickly turned the S-shaped specimen over, raised his calloused thumb, and rubbed it along the inner curved surface.
This system is not reliable. The key lies in whether it can make something.
…
Then, Lu Zhou, who was standing aside, saw him extend his index finger and lightly touch the S-shaped specimen, and his expression suddenly changed.
The next day, a truck from the Bureau of Science and Industry arrived at the Institute for Advanced Study.
But just one.
The speed of this tool is estimated to be at least tens of thousands...
Lu Zhou: "..."
The S-type test piece is a machine tool testing standard proposed by several experts from AVIC and the Academy of Engineering. It was first disclosed in the form of a patent. Later, because it can indeed play a special role in testing five-axis linkage CNC machine tools, it has become popular throughout the country. Major manufacturing plants and machine tool factories have been promoted.
Something's not quite right.
If you can't make it, or if it turns out to be a defective product, it will be useless even if you spin the knife into the sky.
Lu Zhou walked over from the main entrance, without looking at Yang Zhongquan standing next to him, and spoke directly to Director Li.
…
The benefits of high-speed cutting are obvious. The high-speed removal of chips reduces the cutting force and thermal stress deformation of the workpiece, improves the possibility of cutting rigid and thin-walled parts, and the smoothness of the processed parts will be very high.
The benefits of high-speed cutting are obvious. The high-speed removal of chips reduces the cutting force and thermal stress deformation of the workpiece, improves the possibility of cutting rigid and thin-walled parts, and the smoothness of the processed parts will be very high.
"It seems to be processed."
The AGV logistics vehicle that was rushing back and forth suddenly stopped.
A group of people came to the warehouse again, preparing to load the machine tools into the truck.
The next day, a truck from the Bureau of Science and Industry arrived at the Institute for Advanced Study.
After a long time, a few characters appeared on the phone screen.
The next day, a truck from the Bureau of Science and Industry arrived at the Institute for Advanced Study.
However, while there are advantages, the weaknesses are also fatal. High-speed cutting may cause broken blades and melted and scorched parts.
The next day, a truck from the Bureau of Science and Industry arrived at the Institute for Advanced Study.
Seeing that there was no movement from the machine tool, Lu Zhou stuffed his phone back into his pocket, looked at Yang Zhongquan, and said with a smile.
The next day, a truck from the Bureau of Science and Industry arrived at the Institute for Advanced Study.
Normally, this high-speed cutting needs to be coordinated with the corresponding feed speed, keeping both within a certain range, so that the processing accuracy, smoothness, tool life, etc. can be optimized.
Lu Zhou: "Then please get familiar with it as soon as possible..."
But if you think about it carefully, it actually makes sense for Xiao Ai to say this. After all, you can file a Transformer out of something as rough as an industrial robot. If you use a more professional industrial machine tool, it won't be a big problem, right
Looking at the message on the screen, Lu Zhou felt a little embarrassed even though he felt that he was quite thick-skinned. He scratched his cheek and said.
Is it done
"I told you that you don't believe in evil, so you can test it yourself and see if it works."
Thinking of this, Yang Zhongquan's brows relaxed again, returning to his previous calm look.
Whether a CNC system is excellent or not is reflected in this kind of detail.
The S-type test piece is a machine tool testing standard proposed by several experts from AVIC and the Academy of Engineering. It was first disclosed in the form of a patent. Later, because it can indeed play a special role in testing five-axis linkage CNC machine tools, it has become popular throughout the country. Major manufacturing plants and machine tool factories have been promoted.
The next day, a truck from the Bureau of Science and Industry arrived at the Institute for Advanced Study.
Normally, this high-speed cutting needs to be coordinated with the corresponding feed speed, keeping both within a certain range, so that the processing accuracy, smoothness, tool life, etc. can be optimized.
Lu Zhou walked over from the main entrance, without looking at Yang Zhongquan standing next to him, and spoke directly to Director Li.
Xiao Ai: [Hmm, master, don’t worry and leave it to me!]
Seeing the change in his expression, Lu Zhou didn't quite understand what he was thinking. He just smiled and teased: "Is it burnt? Why don't you blow it off first?"
The next day, a truck from the Bureau of Science and Industry arrived at the Institute for Advanced Study.
As the button was pressed, the machine tool lying in the warehouse suddenly moved like a beast that was ready to go. I saw the tool connected to the spindle rotating at high speed, and the solid cubic blank fixed on the workbench was like a collapsed snow peak, peeling off a large amount of metal debris.
If an inferior machine tool breaks a tool when processing parts, it is not necessarily due to the quality of the tool or bearing itself. At least half of the possibility is that it is caused by the CNC system.
Thinking about it, if they were killed in the same tree, those people engaged in intelligence work would be too stupid.
Xiao Ai: [Hmm, master, don’t worry and leave it to me!]
Looking at the message on the screen, Lu Zhou felt a little embarrassed even though he felt that he was quite thick-skinned. He scratched his cheek and said.
Of course, being able to maintain such a high rotational speed without breaking the knife was just a win in Yang Zhongquan's eyes.
What is the S-type test piece
It was estimated that Lu Zhou copied a copycat system from somewhere and installed it. Yang Zhongquan did not get angry with him. Yun Danfeng lightly lit a cigarette and glanced at the machine tool with squinted eyes.
…
This basic operation is nothing to brag about. Many machine tools equipped with imported ceramic bearings and Nissan systems can also do it, not to mention the latest five-axis machine tool from Siemens.
"I told you that you don't believe in evil, so you can test it yourself and see if it works."
However, while there are advantages, the weaknesses are also fatal. High-speed cutting may cause broken blades and melted and scorched parts.
Upon hearing this, Director Li was so shocked that the cigarette butt on his finger almost fell to the ground.
However, before he could ask in detail, Yang Zhongquan beside him laughed casually, "Oh? Who are you looking for?"
Lu Zhou: "..."
Upon hearing this, Director Li was so shocked that the cigarette butt on his finger almost fell to the ground.
As an academician of the Academy of Engineering and the chief engineer of Shenyang Machinery, Yang Zhongquan was naturally involved when the testing standards for this S-shaped specimen were formulated. It is no exaggeration to say that with his many years of experience, he can tell whether the entire set of machine tools will work if an S-type test piece is produced, and he can reach out and touch it.
Whether a CNC system is excellent or not is reflected in this kind of detail.
This system is not reliable. The key lies in whether it can make something.
Lu Zhou: "..."
Lu Zhou: "How would you like to test it?"
It was estimated that Lu Zhou copied a copycat system from somewhere and installed it. Yang Zhongquan did not get angry with him. Yun Danfeng lightly lit a cigarette and glanced at the machine tool with squinted eyes.
The speed of this tool is estimated to be at least tens of thousands...
Lu Zhou: "How would you like to test it?"
Xiao Ai: [Hmm, master, don’t worry and leave it to me!]
If you can't make it, or if it turns out to be a defective product, it will be useless even if you spin the knife into the sky.
Thinking of this, Yang Zhongquan's brows relaxed again, returning to his previous calm look.
The next day, a truck from the Bureau of Science and Industry arrived at the Institute for Advanced Study.
Although he always felt that this sentence was full of flaws, he couldn't think of a better place to start complaining.
"Xiao Ai, these devices you bought are not equipped with systems?"
Thinking about it, if they were killed in the same tree, those people engaged in intelligence work would be too stupid.
Lu Zhou walked over from the main entrance, without looking at Yang Zhongquan standing next to him, and spoke directly to Director Li.
Xiao Ai: [Why do you need to install the system? Isn’t this kind of thing easy to use? 0.0]
Thinking of this, Yang Zhongquan's brows relaxed again, returning to his previous calm look.
Lu Zhou walked over from the main entrance, without looking at Yang Zhongquan standing next to him, and spoke directly to Director Li.
The speed of this tool is estimated to be at least tens of thousands...
Xiao Ai: [Why do you need to install the system? Isn’t this kind of thing easy to use? 0.0]
Thinking of this, Yang Zhongquan's brows relaxed again, returning to his previous calm look.
Of course, being able to maintain such a high rotational speed without breaking the knife was just a win in Yang Zhongquan's eyes.
However, before he could ask in detail, Yang Zhongquan beside him laughed casually, "Oh? Who are you looking for?"
Standing next to the control terminal, Lu Zhou, who didn't know much about this stuff in the first place, simply took out his mobile phone and continued to read the paper he hadn't finished last night, turning a deaf ear to what was going on in the warehouse. After about ten minutes, the high-speed rotating tool stopped, and a metal piece twisted into an S shape lay on the workbench.
At night, at the warehouse where the equipment was stored, a flat AGV logistics vehicle followed Lu Zhou through the door and walked around a few times on the flat ground filled with equipment. Seeing it scurrying around in the warehouse, Lu Zhou was about to ask what it was doing when the phone in his pocket vibrated.
This basic operation is nothing to brag about. Many machine tools equipped with imported ceramic bearings and Nissan systems can also do it, not to mention the latest five-axis machine tool from Siemens.
Several engineers standing around had surprised expressions on their faces.
Is it done
This system is not reliable. The key lies in whether it can make something.
The hand holding the S-shaped specimen was shaking slightly, and Yang Zhongquan spoke intermittently with a trembling voice.
What is the S-type test piece
The S-type test piece is a machine tool testing standard proposed by several experts from AVIC and the Academy of Engineering. It was first disclosed in the form of a patent. Later, because it can indeed play a special role in testing five-axis linkage CNC machine tools, it has become popular throughout the country. Major manufacturing plants and machine tool factories have been promoted.
This system is not reliable. The key lies in whether it can make something.
Is it done
At night, at the warehouse where the equipment was stored, a flat AGV logistics vehicle followed Lu Zhou through the door and walked around a few times on the flat ground filled with equipment. Seeing it scurrying around in the warehouse, Lu Zhou was about to ask what it was doing when the phone in his pocket vibrated.
After a long time, a few characters appeared on the phone screen.
Fortunately, although he didn't understand it, Xiao Ai next to him did.
"Who installed this system for you?"
Of course, although he believed in Xiao Ai's abilities, Lu Zhou still asked just in case out of worry.
So fast
Without paying any attention to his teasing, Yang Zhongquan quickly turned the S-shaped specimen over, raised his calloused thumb, and rubbed it along the inner curved surface.
Seeing the change in his expression, Lu Zhou didn't quite understand what he was thinking. He just smiled and teased: "Is it burnt? Why don't you blow it off first?"
The next day, a truck from the Bureau of Science and Industry arrived at the Institute for Advanced Study.
Lu Zhou replied with a straight face: "State secrets."
Xiao Ai: [Hmm, master, don’t worry and leave it to me!]
Seeing that there was no movement from the machine tool, Lu Zhou stuffed his phone back into his pocket, looked at Yang Zhongquan, and said with a smile.
Whether a CNC system is excellent or not is reflected in this kind of detail.
"Well, another one was borrowed."
"You won't damage the machine tool by messing around like this, right?"
"It seems to be processed."
Fortunately, although he didn't understand it, Xiao Ai next to him did.
Of course, being able to maintain such a high rotational speed without breaking the knife was just a win in Yang Zhongquan's eyes.
Lu Zhou: "..."
"You don't need to remind me."
Upon hearing this, Director Li was so shocked that the cigarette butt on his finger almost fell to the ground.
However, before he could ask in detail, Yang Zhongquan beside him laughed casually, "Oh? Who are you looking for?"
Yang Zhongquan responded coldly and walked towards the machine tool with a frown.
Something's not quite right.
A group of people came to the warehouse again, preparing to load the machine tools into the truck.
"I'll find someone to install the CNC system."
Standing next to the machine tool and observing, I saw that the wrinkles on the old man's forehead were getting deeper.
The S-type test piece is a machine tool testing standard proposed by several experts from AVIC and the Academy of Engineering. It was first disclosed in the form of a patent. Later, because it can indeed play a special role in testing five-axis linkage CNC machine tools, it has become popular throughout the country. Major manufacturing plants and machine tool factories have been promoted.
This system is not reliable. The key lies in whether it can make something.
However, just by rubbing it, the entire expression on his face changed.
The benefits of high-speed cutting are obvious. The high-speed removal of chips reduces the cutting force and thermal stress deformation of the workpiece, improves the possibility of cutting rigid and thin-walled parts, and the smoothness of the processed parts will be very high.
This system is not reliable. The key lies in whether it can make something.
Lu Zhou: "..."
Then, Lu Zhou, who was standing aside, saw him extend his index finger and lightly touch the S-shaped specimen, and his expression suddenly changed.
Lu Zhou: "..."
However, before he could ask in detail, Yang Zhongquan beside him laughed casually, "Oh? Who are you looking for?"
"Who installed this system for you?"
Whether a CNC system is excellent or not is reflected in this kind of detail.
After a moment of pause, Lu Zhou changed the topic and spoke.
Standing next to the control terminal, Lu Zhou, who didn't know much about this stuff in the first place, simply took out his mobile phone and continued to read the paper he hadn't finished last night, turning a deaf ear to what was going on in the warehouse. After about ten minutes, the high-speed rotating tool stopped, and a metal piece twisted into an S shape lay on the workbench.
Is it done
Warm!
After a long time, a few characters appeared on the phone screen.
Lu Zhou replied with a straight face: "State secrets."
Of course, although he believed in Xiao Ai's abilities, Lu Zhou still asked just in case out of worry.
"I'll find someone to install the CNC system."
But just one.
Xiao Ai: [It is difficult to buy QAQ using the same method]
After a long time, a few characters appeared on the phone screen.
After walking to the control terminal and standing for a while, Lu Zhou pretended to touch it twice and then pressed the start button.
Seeing the change in his expression, Lu Zhou didn't quite understand what he was thinking. He just smiled and teased: "Is it burnt? Why don't you blow it off first?"
It can be said that this S-type test piece is one of the prides of the domestic machine tool industry.
It wouldn't be a loss if one machine tool could be replaced by a launch site, not to mention the remaining one should be enough, it would just take more time at most.
Xiao Ai: [No, I will use it carefully. (.▽.)]
Thinking of this, Yang Zhongquan's brows relaxed again, returning to his previous calm look.
It can be said that this S-type test piece is one of the prides of the domestic machine tool industry.
Lu Zhou: "Then please get familiar with it as soon as possible..."
Looking at the message on the screen, Lu Zhou felt a little embarrassed even though he felt that he was quite thick-skinned. He scratched his cheek and said.
Without paying any attention to his teasing, Yang Zhongquan quickly turned the S-shaped specimen over, raised his calloused thumb, and rubbed it along the inner curved surface.
It can be said that this S-type test piece is one of the prides of the domestic machine tool industry.
"Well, another one was borrowed."
This basic operation is nothing to brag about. Many machine tools equipped with imported ceramic bearings and Nissan systems can also do it, not to mention the latest five-axis machine tool from Siemens.
It wouldn't be a loss if one machine tool could be replaced by a launch site, not to mention the remaining one should be enough, it would just take more time at most.
However, just by rubbing it, the entire expression on his face changed.
At night, at the warehouse where the equipment was stored, a flat AGV logistics vehicle followed Lu Zhou through the door and walked around a few times on the flat ground filled with equipment. Seeing it scurrying around in the warehouse, Lu Zhou was about to ask what it was doing when the phone in his pocket vibrated.
It was estimated that Lu Zhou copied a copycat system from somewhere and installed it. Yang Zhongquan did not get angry with him. Yun Danfeng lightly lit a cigarette and glanced at the machine tool with squinted eyes.
After a moment of pause, Lu Zhou changed the topic and spoke.
A group of people came to the warehouse again, preparing to load the machine tools into the truck.
Standing next to the control terminal, Lu Zhou, who didn't know much about this stuff in the first place, simply took out his mobile phone and continued to read the paper he hadn't finished last night, turning a deaf ear to what was going on in the warehouse. After about ten minutes, the high-speed rotating tool stopped, and a metal piece twisted into an S shape lay on the workbench.
Although he always felt that this sentence was full of flaws, he couldn't think of a better place to start complaining.
[Where is my machine tool? Such a big one, who was here just now. (°ー°〃)]
When he flicked the cigarette ashes with his index finger, Yang Zhongquan said casually without raising his eyelids: "I won't embarrass you, just make an S-shaped test piece."
The hand holding the S-shaped specimen was shaking slightly, and Yang Zhongquan spoke intermittently with a trembling voice.
Lu Zhou: "Then please get familiar with it as soon as possible..."
Standing next to the control terminal, Lu Zhou, who didn't know much about this stuff in the first place, simply took out his mobile phone and continued to read the paper he hadn't finished last night, turning a deaf ear to what was going on in the warehouse. After about ten minutes, the high-speed rotating tool stopped, and a metal piece twisted into an S shape lay on the workbench.
"Who installed this system for you?"
Lu Zhou: "...?"
Xiao Ai: [It is difficult to buy QAQ using the same method]
But if you think about it carefully, it actually makes sense for Xiao Ai to say this. After all, you can file a Transformer out of something as rough as an industrial robot. If you use a more professional industrial machine tool, it won't be a big problem, right
Xiao Ai: [No, I will use it carefully. (.▽.)]