With countless people busy day and night, the three years of staying in the camp territory passed by in a flash. In the past three years, due to the integration of technology, the strength of the fleet's war technology system has increased a lot. Materials, weapons, and energy have all been significantly improved.
But there was also a product that could not be copied within three years, the Getta Ray.
Even though he has completely analyzed all the technologies contained in the trial Getter over the past three years, and is even sure that Luo can create a more perfect body than the trial Getter, the main energy source of the Getter ray cannot be copied yet. Under the circumstances, even if a more perfect body is created, it will not become a true Getter because of the Getter ray.
According to the calculations of Luo and his subordinate researchers, it would take seven years to copy the Getta ray at the current speed. Xiao Ran didn't know how many years it took the doctor in the Getta world to copy the Getta ray. It still takes seven years to gain the power of the entire legion in all territories, and a total of ten years is already considered a very long time.
It is not difficult for the entire research department to completely crack Geta's other technologies. Speaking of Geta, except for the Geta ray, the technical content in other places is not as high as imagined, even in the 0079 world. The technical level can be fully analyzed, and the only thing that is really special is the getter ray.
In comparison, from a purely technical level, the technical content of Getter NEO is higher than that of Getter. However, Getter NEO has also been completely analyzed. In terms of materials, Getter NEO is made of active alloys. The most relevant difficulty has been solved, and other technologies are really nothing to the current scientific research power.
After the first year of the Getter NEO prototype machine passed, a total of three generations appeared in the territory. The first generation of Getter NEO prototype machine was completely copied from the Getter NEO prototype, except for additional weapons. It is slightly different, with the addition of a beam rifle, beam saber, and beam weapons that can be used in all three forms. Even after transformation, the appearance is not much different from Geta NEO.
By this generation, the territory actually had all the capabilities to manufacture Getter NEO, but the department that developed the Getter NEO body was not satisfied with just this, and carried out a second development based on the current situation of the fleet. , the second trial machine rolled off the production line only half a year after the first trial machine came off the production line, but the second newly developed trial machine is already completely different from the previous version.
The concept of the first generation is replication, while the concept of the second generation is fusion, so that the three units of Geta NEO have excellent individual combat capabilities even when separated, and the integration of the existing fleet is also a fighter. Due to the situation, it has become the key goal of this research and development to allow the three combined fighters to also have the ability to transform.
After half a year of research and development, the first test machine of the Getta NEO type 2, which was completely redeveloped and manufactured based on the flexible use of Getta alloy, was rolled out. It was manufactured by combining the current deformation fighter technology. It is a product that is very different from the Getta fighter in fighter form, and already has many features of the VF-30 series of fleet-morphing fighters.
The experiment was ultimately successful. Three fighters with three-stage deformation capabilities were successfully combined into a brand new Geta. The new Geta looked completely different from Geta NEO. It was thinner and had a deformed structure. The skeleton was also exposed in many places. This was a complete experimental machine, not even equipped with a weapon.
However, it took a year to go from the second generation to the third generation final product. The whole year was just to supplement and improve the second generation test machine. It was longer than the time it took to directly build a new fighter jet and assemble it. It's longer, but the end result is extremely satisfying.
The final new model completely abandoned the name Geta, because apart from the same three-machine combination mode as Geta, this body no longer had much to do with Geta and became a completely new series.
Before being combined, the three fighters have the same three-stage transformation capabilities as ordinary transforming fighters. The fortress form, MS form and fighter form are not bad, but the appearance is more different from ordinary fighters.
The three newly manufactured combined fighter aircraft have different bodies. They all use Geta alloy as the outer armor. The ductility and flexibility of the alloy are combined with a multi-stage deformation structure to achieve the purpose of deformation, and they are all better than normal deformation. The fighter plane is slightly larger.
The first machine is a high-speed machine. It is similar in appearance to the ancient model VF-4, but it is more streamlined, larger, stronger and heavier. It naturally looks good-looking and domineering. It has a retractable and foldable small flying wing and uses a modified beam Gatling gun. The rear thruster module is obviously stronger than the normal body.
The body shape will naturally be larger after the body is larger and deformed, but even so, the legs look a bit thicker, and some weapons are attached, such as two small round positron cannons, and these two small positron cannons It directly replaces the arm, and the palm is 'grown' directly from the muzzle of the positron cannon, and can be 'retracted' when not in use. In addition, the positron cannon is the two handles mounted on the wrist. The beam saber's ability to fight alone is no worse than that of a normal transforming fighter.
The second aircraft is a multi-purpose aircraft. It can add reconnaissance equipment to become a reconnaissance aircraft, and it can use a sniper rifle to become a sniper aircraft. Its stealth performance is the best among the three aircraft, and it may have a lot to do with the shape of the aircraft. A mirage system is also installed, and the amount of weapons carried is also minimal.
In addition to the standard missile launch capability of a single body, the beam saber, two beam guns and other beam guns are installed on the body. All other weapons will be matched according to personal needs during the attack, selected according to occupation or personal ability. Sniper rifle, beam cannon or standard beam gun, so both appearance and purpose emphasize specialness and versatility.
Special refers to giving special abilities to the body itself or after combining them, such as the mirage system, solar furnace, λ-DRIVER, thermal energy ray emitting device, the Secmu system that can be used by ordinary people, all of them. These things are all installed on the No. 1 aircraft, so the body itself does not have the conditions to install other weapons. It can be said that the body is the most selective for the driver but the least selective for the driver.
People who can exert the power of λ-DRIVER are more able to use this machine's capabilities, and people who cannot use λ-DRIVER can also use it.
In terms of shape, the general shape of the VF-171, which is the most versatile and has undergone several evolutions, is used. Some unique modifications due to the need for combination have led to some changes in the shape of the body, and the size is also the same as that of the No. 1 machine. One circle and a few more interfaces.
The No. 3 machine is a completely heavy-fire machine, with the most powerful firepower and the most powerful energy. It can be regarded as a weapons arsenal in itself. Its appearance refers to the V-6K?nigMonster, but its structure It has been modified and has beam-directed armor. Its defensive firepower is the highest among the three machines, and its flexibility is the lowest.
Missiles, beam cannons, positron cannons, GN Dragoons, solar furnaces, beam deflection armor, and the ability to launch large missiles, that is, MED warheads or reactive bombs, a body that completely extends in the direction of firepower and armor.
All three bodies use Geta active alloy as armor material, so it is not surprising that the armor changes from square to round due to the deformation of the internal skeleton during deformation. In addition, VS and energy conversion are added. The armor serves as support, so there is no need to worry about the strength of the frame and the strength of the armor.
The three bodies are also combined into three different forms. The No. 1 machine is a general combat form with the head. After the combination, the feet of the No. 1 machine become the arms of the combined machine. Two positron cannons will appear on both sides of the head. Unit No. 3 is in the middle, Unit 3 is at the bottom. The flying wings of Unit 2 have become the flying wings of the rear group and the body. The arms of Unit 3 have become the skirts and shields of the beam deflection armor capability. In terms of weapons, they are both far and near. Yes, the original beam Gatling gun has become a huge beam saber, which has the strongest universal ability.
The head of the No. 2 machine is in a space combat form. Because of the relationship between the No. 3 machine and the middle, the feet of the No. 2 machine originally became a pair of adjustable flying wings. The No. 1 machine uses the highest propulsion capacity to make this form. It has the fastest speed among the three forms, but does not have strong land combat capabilities. Its main attack method is shooting, and it can maximize the effect of λ-DRIVER.
The No. 3 machine as the leader will have the strongest firepower in all forms. The four giant cannons that cannot be used in other forms will be extended, and all the weapons of the body will also be used. The main attack methods are fire coverage and Fire bombardment.
In general, the No. 1 form emphasizes general capabilities, the No. 2 form emphasizes high-speed combat capabilities and special operations, and the No. 3 machine emphasizes maximum firepower, and the same is true when separated. However, no matter which form it is in, once the combined Mirage system is common, the solar furnaces installed separately on Unit 2 and Unit 3 can also get the same frequency. In addition, the auxiliary driving of Unit 3, Mass Production Harrow, and GN Dragoon's Use is not a problem at all.
This new machine was named CD-1, also called Guardian 1. The three machines were separated into C machines, and after being combined, they became C machines. Perhaps it was because they were built in the territory under the jurisdiction of the real zone. It is formed, so it is also evaluated according to the level of the real zone.
After completion, only fifteen sets were built, one of which was taken over by Xiao Ran and placed on the Galaxy Diva. Al Elf piloted the No. 1 unit, Moses piloted the No. 2 unit, and Billy piloted the No. 3 unit. Machine number.